How To Clean An Area Rug With A Pressure Washer

Last updated:

1. Decide On The Cleaning Location

Choose the location where you want to clean an area rug with a pressure washer. The area should be clean and organized. It is best if you have an area that is large and smooth. This will allow you to spread out the entire rug. You should always clean your area rug with a pressure washer outside your home. 

2. Prepare The Rug For Cleaning By Sweeping It

Once your cleaning area is set up, turn the rug upside down and lay it out on the floor. Before laying the rug on the floor, sweep the rug on both sides. Do this to remove any loose dirt that may be present on the surface of the rug’s surface. When you’re finished with this process, you will be ready to clean an area rug with a pressure washer.

3. Examine The Care Instructions For Your Area Rug Before Cleaning It

Any chemicals that are not recommended for use on the area rug will be listed in the cleaning instructions that come with the rug. Due to the fact that various detergents and chemicals might stain the rug, it is critical that you take note of this.

4. Select The Most Appropriate Cleaning Agent

Selecting a detergent or any other cleaning product that is appropriate for use on your area rug is the next stage in the cleaning process. 

It may be that the pressure washer you’re using doesn’t come equipped with a soap tank.  If that is the case then you can apply the detergent directly to the spots on your rug. To remove the stains, use mild cleaning chemicals. 

Additionally, make sure that you only use modest amounts of cleaning products.  You do not want your rug to fade or become discolored. 

Allow it to sit for a few minutes before moving on to the next step in the process.

If there are any ugly or difficult stains on the area rug, use a brush with stiff bristles to remove them before washing the rug with a high-pressure washer.

5. Inspect Your High-Pressure Cleaning System

Check to see that your pressure washer is in good working order before you start up the machine. It should be well-oiled, and you should connect all the necessary accessories to it. 

Check the nozzles to make sure they’re in proper functioning order before using them. 

You should connect the pressure washer’s hose to the water supply after the machine has been thoroughly inspected.

6. Washing Your Area Rug

To clean an area rug with a pressure washer, maintain a distance of approximately 0.3 meters between the wand of the pressure washer and the rug’s surface. The rug may be harmed or blown away if the wand is held too close to it as it is being cleaned. Pull the button on the pressure washer and begin thoroughly cleaning your rug. Apply pressure to the rug’s surface with the wand of the pressure washer.  Make sure to cover all of the areas, especially those with visible spots, wet.

7. Thoroughly Rinse The Area Rug

Rinse the area rug with plain water 2 to 3 times to ensure that no soap residue is left in the fibers of the rug before drying it.

8. Allow The Area Rug To Air Dry

Now that you have finished washing the rug, you will want to know how to dry a rug after pressure washing.

Find a suitable location to store the rug while it is drying. The location you choose should be free of debris. Furthermore, it must be large enough to accommodate the rug in its entirety. Make certain that the location you choose is open and breezy so that the rug can dry rapidly.

Important Things To Consider When You Clean An Area Rug With A Pressure Washer

There are some things you should avoid doing when you clean an area rug with a pressure washer.

Do’s

Make use of the proper cleaning solution. If you look around the market today, you’ll see many different choices. But not all will be appropriate for your area rug. The most appropriate cleaning solutions are those that are gentle.

Make sure you’re using the proper tools and equipment to avoid over-or under-cleaning your area rug by using the wrong ones.

When operating the pressure washer, make sure to use the proper amount of pressure. If the pressure is not applied correctly, you may end up harming the rug’s material. If you’re not sure how much pressure to use, start with the smallest amount and progressively increase the amount.

Remember to keep the recommended space between the pressure washer’s wand and the surface of the rug. The distance between the two should be kept at a sufficient distance to ensure that the rug receives the water accurately and with the appropriate level of pressure.

Check to see that the area rug’s material is appropriate for pressure cleaning before you start the cleaning process. This information can be found in the rug’s cleaning instructions, which are included with the rug.

Dont’s

Hot water should not be used to clean an area rug with a pressure washer. It is not necessary to use hot water while cleaning an area rug with a pressure washer because the pressure washer is already producing the necessary pressure.

Keep the wand or the nozzle of the pressure washer away from the rug’s surface when using it to clean it. It causes harm to the area rug. The appropriate distance is around 12 inches.

Conclusion

When it comes to cleaning your area rugs, pressure washing, or what is sometimes referred to as power washing rug is the most effective way. It is not only convenient, but it is also quite speedy. The difficulty of transporting your rug to and from the cleaners and then bringing it back home is eliminated. All you have to do to clean an area rug with a power washer is carefully follow the instructions outlined above to guarantee that you do not end up ruining your rug!

And if you want to clean your area rug at the car wash then check out our article here